Home › Blog › Homes, Complexes and Business
TV Mounting in Durbanville: Brackets, Heights and Hidden Cables

A new 65-inch TV leaning against the lounge wall is a common sight in Durbanville homes after a Black Friday sale. Getting it onto the wall properly is where good TV mounting matters: the right bracket for the wall, a comfortable height, and no tangle of cables hanging under the screen. This guide walks through each choice, room by room, the way our technicians plan it.
Quick answer
Good TV mounting starts with the wall type, then the bracket, then the height. Hang the TV so the middle of the screen sits at seated eye level, use fixings rated for the TV's weight, and plan where the decoder and cables go before drilling. For heavy screens or hollow walls, get a technician.
TV mounting starts with the right TV bracket
There are three main kinds of TV bracket. Pick by how you watch, not by what looks clever in the shop. Most TV mounting problems we fix later come from the wrong bracket.
| Bracket type | What it does | Best for |
|---|---|---|
| Fixed (flat) | Holds the TV flat against the wall | Lounges where you always sit straight in front |
| Tilting | Angles the screen down a little | Bedrooms and TVs mounted a bit higher |
| Full motion (swing arm) | Pulls out and turns left or right | Open-plan rooms, kitchen views, corners |
Check two things on the box: the VESA hole pattern on the back of your TV, and the weight rating. The bracket must match the pattern and carry more than the TV weighs. A full-motion arm also puts extra leverage on the wall when it is pulled out. If you would rather not choose alone, our TV mounting service in Durbanville can bring a suitable bracket on the day.
TV mounting on Durbanville wall types
- Solid brick: the most common in older Durbanville houses. Strong, but needs the right masonry plugs.
- Drywall partitions: found in newer estate homes and renovations. Fix into the metal or timber studs, or use proper cavity anchors.
- Face brick or feature stone: drill into the brick, not the mortar line.
- Above a fireplace: heat and height are both problems. We usually advise against it.
Safety first
Behind many lounge walls run electrical cables and water pipes. Drilling into a live wire is dangerous. We scan the wall before drilling, and we never cut into walls near the DB board without checking the circuit first.

TV mounting height in a Durbanville lounge
The simplest rule: sit on the couch, look straight ahead, and that is roughly where the middle of the screen should be. Too high and you get a sore neck after a long rugby match. Bedrooms are the exception, where a little higher with a tilt works when you watch lying down.
Open-plan homes in Vierlanden and Aurora often need a compromise, because the TV must be seen from the couch and the kitchen. A full-motion arm solves that, as long as the wall is solid enough to carry it. Good TV mounting is about how your family actually uses the room.
- Mark the screen size on the wall with painter's tape before drilling.
- Sit in your usual spot for a few minutes and check it feels right.
- Check for window glare at the time of day you watch most.
- Leave space below for a soundbar or a floating shelf if you want one.
Hiding cables and connecting DStv cables neatly
The cable mess under a wall-mounted TV is what spoils most DIY TV mounting jobs. In a Durbanville home there are usually four things to hide: power, HDMI, the DStv coax cable and often a network cable. If you are adding a second room at the same time, our XtraView installation can share the same cable route.
We use one of three methods, depending on the wall and your budget.
- Trunking: a slim paintable channel on the wall surface. Quick, no chasing, good for rentals.
- Chasing: we cut a groove in the brick, lay a conduit, plaster over and you repaint. The neatest finish.
- Behind drywall: cables drop inside the cavity to a wall plate lower down.
Connecting DStv cables properly matters as much as hiding them. Coax should end in a firmly crimped F-connector, never twisted copper pushed into the socket. A poor joint shows up later as pixelation or an E48-32 error on rainy evenings. Our older post on why weather knocks out DStv signal around Durbanville shows how water in a loose connector causes trouble.
DStv cables and connections explained
| Cable | Runs from | Runs to |
|---|---|---|
| Coax (RG6) | Dish LNB or wall plate | Decoder "LNB in" port |
| HDMI | Decoder | TV HDMI port |
| Ethernet | Router | Explora or smart TV, for Catch Up |
| Power | Wall socket or UPS | TV and decoder |

Need DStv installers in Durbanville?
Tell us what you need or what your screen is showing. We give you a clear price before we drive out.
Where to put the decoder after TV mounting in Durbanville
A decoder needs air, a clear line for the remote and easy access to the smartcard. Do not hide it behind the TV unless you use a remote extender, because the remote will not reach it.
A floating shelf under the screen is our usual choice. If you want the decoder out of sight, a cabinet with an open back for airflow works too. On TV mounting jobs for a second room, we often add the decoder to your account at the same time, and our breakdown of the DStv XtraView price for a second TV explains what that adds each month.
Technician tip
Put a power point behind the TV before it goes up, not after. If you are already chasing a wall for cables, adding a socket at that height is far easier than running an extension later.
TV wall mount installation in Durbanville: how we do it
A professional TV wall mount installation in Durbanville is usually done in one visit. Here is what you can expect when we arrive.
- We check the wall, the TV weight and the bracket you have, or suggest one.
- We mark the height with you and scan for wires and pipes.
- We fix the bracket, level it with a spirit level and hang the TV.
- We route and hide cables, connect the decoder and test the picture.
Prices depend on the TV size, the wall and how much cable work is needed, so we quote first.
If you are also adding a dish or moving one, our guide to DStv installation prices in Durbanville shows the ranges for the dish side. Moving house soon? Plan TV mounting at the new place alongside the dish move, as covered in our article on avoiding the DStv reconnection fee when you move.

Complexes, guesthouses and businesses
Many people in Durbanville live in complexes with HOA rules, where a row of private dishes on the roof is not allowed. A shared system feeds every unit from one set of dishes, so each owner just plugs into a wall point. We design and repair these through our communal DStv systems for complexes.
Guesthouses along the Durbanville Hills wine route and small businesses need TVs that are secure, tidy and easy for guests to use. That means locking brackets, hidden cables and a simple remote setup. Our commercial DStv installation team handles multi-room setups for guest rooms, pubs and waiting rooms.
TV aerial vs dish, plus CCTV and WiFi add-ons
An aerial picks up free land-based channels from a transmitter, and a satellite dish brings in DStv or OpenView. They do different jobs, and a few homes have both. Your TV can accept either feed, but you choose the input from the TV menu.
While the ladder is out, it often makes sense to add other work. Popular add-ons we do in the same visit around Pinehurst, Kenridge and Welgedacht include:
- CCTV cameras under the eaves, cabled back to a recorder near the TV.
- Mesh WiFi or a network point behind the TV for streaming and Catch Up.
- A second TV point in a bedroom or patio.

How often to service your TV and DStv setup
A TV mounting job needs very little care afterwards, but the system around it does. We suggest a quick check every year or two, and after any big storm.
- Check that the bracket bolts are still tight, especially on swing arms.
- Look at the dish for rust and make sure the wind has not moved it.
- Check that cable connectors are dry and tight after the winter rains.
- Read the signal quality on the decoder screen and compare it with earlier.
Book your TV mounting in Durbanville
Tell us the TV size, the wall type and where you want the decoder, and we will quote before we come out. Our DStv installers in Durbanville work across Bellville, Sonstraal Heights and the estates nearby, often the same or next day. Request your TV mounting quote and we will set a time.
For DStv package or account questions, the official DStv website is the best place to check current details.
TV mounting in Durbanville: FAQs
How much does TV mounting cost in Durbanville?
It depends on the TV size, the wall type, the bracket and how much cable hiding you want. Surface trunking is quicker than chasing cables into brick, and a full-motion arm takes longer than a fixed bracket. We look at the job and quote before we come out, so you know the price before any drilling starts.
How high should a TV be mounted on the wall?
For most lounges, the middle of the screen should sit at about your eye level when seated on the couch. Mark the size on the wall with painter's tape and sit in your usual spot to test it first. In bedrooms, mounting a little higher with a tilting bracket works better when you watch lying down.
Can you do TV mounting on a drywall in Durbanville?
Yes, but the bracket must be fixed into the studs or held with proper cavity anchors rated for the weight. Newer estate homes and renovations in Durbanville often have drywall partitions. Heavy TVs on full-motion arms put a lot of leverage on drywall, so we often advise a fixed or tilting bracket there.
Which TV bracket should I buy for TV mounting?
Match the VESA hole pattern on the back of the TV and pick a bracket rated for more than the TV weighs. A fixed bracket suits most lounges, a tilting one suits bedrooms, and a full-motion arm suits open-plan rooms or corners. Cheap brackets with thin arms can sag over time.
How do I hide TV cables on a brick wall?
You can use paintable trunking on the wall surface, or chase a groove into the brick, lay a conduit and plaster over it for a hidden finish. Chasing is neater but messier on the day and needs repainting. Always check for electrical cables and pipes before cutting into a wall.
Can you connect my DStv decoder during TV mounting in Durbanville?
Yes. When we mount a TV in Durbanville we usually connect the decoder in the same visit, crimp proper F-connectors on the coax, run HDMI and power, and test signal quality on the decoder screen. We can also add a floating shelf or move the decoder into a cabinet with airflow.
Talk to our Durbanville team
Call or WhatsApp us for a quote. We answer quickly and we always price the job before we arrive.