DSTV Durbanville

Home › Blog › Packages and Prices

OpenView Decoder Price With Installation Included

Packages and PricesBy our Durbanville DStv teamUpdated 24 October 20268 min read

You've seen an OpenView decoder price on a shelf and another one that says "installation included". They're not the same deal, and the gap between them is where most Durbanville buyers get caught out. Here's what an installed price should cover, what it often leaves out, and how to tell a fair quote from a thin one.

Quick answer

At the time of writing, the OpenView decoder price on openview.co.za is R799 for the box alone, with retail specials from around R599. A decoder with an installation voucher (dish plus fitting) sits at around R1,699. Double storeys, estate rules and long cable runs can add to that, so ask our team for a current quote.

What "installation included" should actually mean

An installed package is meant to get you from a sealed box to a working picture. In practice the word "included" can hide a lot. Some bundles cover a basic dish on an easy wall and nothing more.

The parts a fair bundle covers

  • The OpenView decoder itself, which is the current Wi-Fi enabled model.
  • A dish in the recommended size, around 80 to 85cm, with an LNB and bracket.
  • A standard length of coaxial cable, proper connectors and weatherproofing.
  • Alignment, a first channel scan and a quick check that the picture holds.

The parts that usually cost extra

Extra cable beyond the standard run is the big one. So are a second TV point, a pole mount, roof work on a steep pitch, or hiding the cable inside a wall. None of these are tricks, but you should see them on paper before work starts.

If you'd like to see how this compares with DStv work, our older post on OpenView installation price and process explains the full job from start to finish.

OpenView decoder price compared: three ways to buy

There are three common routes in Durbanville. Each has a different starting price and a different amount of work left for you.

RouteTypical price at the time of writingWhat you still need
Decoder onlyR799 on openview.co.za, specials from around R599A dish, LNB, cable and someone to align it
Decoder with installation voucherAround R1,699A booking, plus any extras the voucher doesn't cover
Local installer supplies and fitsQuote based on your houseNothing, if the quote lists every item

Buying an OpenView decoder with installation through a voucher works well for a simple single-storey home in Pinehurst or Kenridge with a clear wall facing north-east. The installer route makes more sense once your home has a quirk, like a high gable or a TV on the far side of the house.

Why the OpenView decoder price with installation changes in Durbanville

Two homes on the same street can get two different quotes. It isn't about the box. It's about how hard it is to get a clean signal from the dish to the TV.

Double storeys and roof pitch

A lot of Durbanville family homes are double storeys. The dish often has to go on an upper wall or fascia to see over the neighbour's roof, which means a longer ladder, more cable and more time. Our DStv installation price guide shows how the same factors move dish quotes in general.

Estate and HOA rules

Security estates in Vierlanden and Sonstraal Heights often set rules on where a dish may go and how cables must run. Sometimes the only allowed spot is round the back, which adds cable and labour.

The Tygerberg ridge and tall trees

OpenView uses the same satellite position as DStv, so the dish points roughly north-east and fairly high. On the slopes near Plattekloof, the ridge and mature oaks can block part of that view, and the dish has to move to find a clear line.

Good to know

OpenView belongs to eMedia. It isn't a DStv product, and there's no monthly subscription or contract. You pay once for the kit and the install, then watch for free.

Can an old DStv dish bring the cost down?

Often, yes. Because OpenView broadcasts from the same satellite position as DStv, an existing dish can usually be reused. That can trim the installed price, since you're not paying for a new dish and bracket.

The catch is condition. After a few hot dry summers and wet winters, LNBs fade and connectors corrode. We test the old LNB and cable first, and only reuse them if the readings are good. If the dish has drifted, a satellite dish alignment is usually cheaper than a full new setup.

Planning to keep DStv in another room as well? Tell us up front. We'll check what the dish and cabling can carry and quote for both TVs at once.

Need DStv installers in Durbanville?

Tell us what you need or what your screen is showing. We give you a clear price before we drive out.

How an installed OpenView job runs on the day

Knowing the steps helps you spot a rushed job. A decent install in Durbanville or Brackenfell takes a couple of hours on a normal house.

  1. We look at the roof and walls with you and agree where the dish goes.
  2. The bracket goes up, the dish is mounted and the cable is run and clipped neatly.
  3. We fit connectors, seal them against rain and align the dish on a signal meter.
  4. The decoder is connected, the channels are scanned and we check the picture on a few of them.
  5. We help you activate the decoder online, on WhatsApp or in the OpenView app.
  6. We show you the remote and leave the area tidy.

Safety first

Dish work on a double storey means ladders and roof edges. Please don't climb up to adjust a dish yourself. If the picture drops after a storm, try the safe checks in our guide to OpenView no signal after a storm and leave the roof to a technician.

Checking an OpenView decoder price quote before you say yes

A good quote is easy to read. Use this list when one lands in your inbox.

  • Is the decoder listed separately, or is it already part of the price?
  • Does it name the dish size and say whether it's new or reused?
  • How many metres of cable are included, and what's the rate after that?
  • Is alignment on a proper meter included, not just a phone app?
  • Will they help with activation before they leave?
  • Are travel costs to Welgedacht, Kraaifontein or Bellville spelt out?

If two quotes differ a lot, the cheaper one often skipped one of these lines. Our OpenView installation quotes list every item so you can compare like with like.

It's also worth knowing where OpenView fits next to other options. Some homes add a TV aerial installation for local channels, while others want DStv in the main lounge. Our DStv decoder price guide helps if you're weighing up a paid service too.

What we do differently on an installed price

We quote first, before we drive out. Send us a photo of the house from the street and the spot where the TV will go, and we'll tell you what's likely to be needed.

We test the signal with you before we leave. You'll see the channels working on your own TV, not just a reading on a meter. We also tidy the cable run so it suits the estate rules and the look of your home.

If you'd also like the TV on the wall, we can do both in one visit. Ask about TV wall mounting when you book so we bring the right bracket.

Ready to get OpenView fitted in Durbanville?

Tell us your suburb, whether you have an old dish and roughly where the TV sits. We'll come back with a clear installed price, often the same or next day depending on the schedule. You can WhatsApp us on 072 237 6363 or use our contact form for a quote.

We're the local team for DStv installation in Durbanville, and we fit OpenView just as carefully.

OpenView decoder price: FAQs

What is the OpenView decoder price with installation in South Africa?

At the time of writing, a decoder with an installation voucher costs around R1,699, which covers a dish and a standard fitting. Homes with long cable runs, double storeys or strict estate rules may need extras. Ask our team for a current quote.

Does the OpenView decoder price include a dish?

Not when you buy the decoder on its own. The R799 price on openview.co.za is for the decoder only and excludes the dish and installation. You need a dish, LNB, cable and alignment, or a bundle that includes them.

Can I use my DStv dish for OpenView?

Usually, yes. OpenView and DStv broadcast from the same satellite position, so an existing dish can often be reused. A technician should test the LNB and cabling first, because old parts can weaken the signal.

How long does an OpenView installation take in Durbanville?

A standard install on a normal Durbanville house takes a couple of hours, including alignment, the channel scan and activation. Double storeys, estate approvals and long cable runs can stretch that. We give you a time estimate with the quote.

Are there monthly fees after I pay the OpenView decoder price?

No. OpenView is free satellite TV with no subscription and no contract. Once the kit is paid for and installed, the channels are free to watch.

Talk to our Durbanville team

Call or WhatsApp us for a quote. We answer quickly and we always price the job before we arrive.