DSTV Durbanville

Home › Blog › Installation and Costs

55 Inch TV Wall Mounting Bracket: How to Pick the Right One

Installation and CostsBy our Durbanville DStv teamUpdated 13 October 20269 min read

You've got a new 55 inch TV in the box and a blank lounge wall waiting for it. The right 55 inch TV wall mounting bracket depends on four things: the holes on the back of your TV, its weight, the wall you're drilling into and how you'll watch. Get those right and the bracket almost picks itself. Here's how we help Durbanville families choose.

Quick answer

To pick a 55 inch TV wall mounting bracket, match the bracket to your TV's VESA hole pattern, choose one rated comfortably above the TV's weight and make sure it suits your wall. Fixed brackets sit flattest, tilting ones cut glare, and full-motion arms suit corners and open-plan rooms. If you might upgrade later, buy one rated for bigger screens.

Start with the back of your TV

Turn the TV face down on its box or a soft blanket and look at the back. You'll see four threaded holes in a square or rectangle. That spacing is the VESA pattern, and it decides which brackets will fit.

Find the VESA pattern

The pattern is given in millimetres, width first, such as 300 x 300. It's printed in the manual and usually on a sticker near the holes. If you can't find it, measure it yourself:

  1. Measure across between the centres of the two top holes.
  2. Measure down between the centres of the two left-hand holes.
  3. Write both numbers down in millimetres, width first.
  4. Take the numbers, or a photo of the back of the TV, when you go shopping.

Many 55 inch sets share common patterns, but brands differ, so always check yours. When our team handles TV mounting in Durbanville, this is the first thing we look at.

A bracket's box lists every VESA pattern it supports. If yours isn't on the list, it won't bolt on safely, however good the price looks.

Check the weight with the stand removed

The manual gives the TV's weight with and without the stand. Use the weight without the stand. Then pick a bracket whose rated load is well above that figure, not just equal to it.

Full-motion arms in particular need headroom. When the arm is pulled out, the TV's weight acts like a lever on the wall fixings.

Fixed, tilt or full motion: which wall mounting bracket suits a 55 inch TV

All three types hold a 55 inch screen well. The difference is how you use the room.

Bracket typeBest forWatch out for
Fixed (flat)A lounge where everyone sits facing the wallHard to reach the cables behind the TV later
TiltingTVs mounted a bit higher, or rooms with window glareStands slightly further off the wall
Full motion (swivel arm)Corners, open-plan rooms and kitchens that face the TVNeeds a strong wall and sits out further when folded
Ceiling mountBedrooms, braai rooms and walls with no spaceNeeds a solid ceiling fixing, see below

In most family lounges a tilting bracket is the sweet spot. It sits close to the wall but lets you angle the screen down a little, which helps when afternoon sun hits the room. Our TV wall mounting technicians bring the common types with them.

Your wall matters as much as the 55 inch TV wall mounting bracket

A great bracket on a weak wall is still a weak mount. Before you buy, know what you're drilling into.

Solid brick or block walls

Most older Durbanville homes and many in Pinehurst and Kenridge have solid brick walls. These take standard wall plugs and bolts well. Any bracket type will work, including heavy full-motion arms.

Drywall and hollow partitions

Newer estate homes and upstairs rooms in double storeys often have drywall partitions. A fixed or tilting bracket can work on drywall if it's fixed into the timber or steel studs behind the board, or with fixings made for hollow walls. A full-motion arm on drywall is a risk, because the leverage pulls the fixings forward.

Good to know

Tap the wall with your knuckles. A dull thud usually means brick. A hollow knock means board. If you're not sure, our technicians check with a stud finder before drilling.

Planning ahead: a 65 inch TV mount or a 70 inch TV bracket

TVs keep getting bigger, and many people upgrade within a few years. If you think your next set could be larger, buy a bracket that already fits it. A 65 inch TV mount usually covers 55 inch sets too, and saves drilling new holes later.

The same goes for a 70 inch TV bracket, as long as it lists your current VESA pattern. Bigger screens use wider patterns, so the bracket must support both the small and the large spacing. Check the weight rating covers the heavier set as well.

Moving rooms or houses? Our DStv relocations team can move the dish and decoder at the same time we take down and refit your bracket.

Need DStv installers in Durbanville?

Tell us what you need or what your screen is showing. We give you a clear price before we drive out.

When a folding ceiling TV mount makes sense

Some rooms don't have a usable wall. Think of a bedroom with built-in cupboards, a kitchen with tiles and windows, or a covered patio with sliding doors. A folding ceiling TV mount hangs the screen from above and folds it flat against the ceiling when you're not watching.

These mounts must be fixed into the roof timbers or a concrete slab, not just the ceiling board. That's why they're a job for a professional.

Safety first

Ceiling and high wall mounts mean ladders and drilling near electrical wiring. Don't try them alone. A falling TV can hurt someone badly, so leave overhead fixings to a qualified installer.

Mounting height and placement in Durbanville homes

As a rule of thumb, the middle of the screen should sit near your eye level when you're seated. In a typical lounge that means mounting lower than most people expect. Go higher only if you use a tilting bracket to angle it back down.

Open-plan rooms in estate homes

Homes in Sonstraal Heights, Vierlanden and Aurora often have one big room for cooking, eating and watching. A full-motion arm on a solid wall lets you turn the TV towards the kitchen or the couch.

Patios and the summer sun

Our hot, dry summers mean long evenings outside. A patio TV needs a sheltered spot, a bracket that won't rust and the screen angled away from the low afternoon sun. Check your HOA rules first, as some estates restrict anything fixed to outside walls.

Cables and the decoder

Plan where the decoder, power and dish cable will go before you drill. Our earlier post on hiding cables in the wall covers the neat options. If you're adding a second TV upstairs, read about XtraView for two TVs first.

Checklist before you buy a wall mounting bracket for your 55 inch TV

  • The bracket lists your TV's exact VESA pattern.
  • Its weight rating is well above your TV's weight without the stand.
  • The type (fixed, tilt, full motion or ceiling) suits how you watch.
  • The fixings suit your wall: brick, drywall studs or ceiling timbers.
  • There's room for cables, the decoder and a power point nearby.
  • Your estate or complex rules allow the spot you've chosen.

Ticking these off means you'll buy once and drill once.

Let us mount it for you

Choosing the bracket is half the job. Fixing it level, into the right part of the wall, with the cables hidden is the other half. Our installers do exactly that across Durbanville, Bellville, Brackenfell and Plattekloof.

We can also tidy up the rest of the setup while we're there, from a new DStv installation to WiFi and network installation for your smart TV. We always quote before we drive out.

Send us your TV model and a photo of the wall through our contact page, and we'll recommend the right bracket.

55 inch TV wall mounting bracket: FAQs

What size wall mounting bracket do I need for a 55 inch TV?

Size is less about screen inches and more about the VESA hole pattern and weight. Find the pattern in your TV manual, then choose a bracket that lists it and has a weight rating well above your TV without its stand. Most brackets cover a range of screen sizes.

How high should a 55 inch TV be mounted on the wall?

Aim for the middle of the screen to sit close to your eye level when seated. In most lounges that's lower than people expect. If the TV must go higher, such as above a fireplace, use a tilting bracket so you can angle it down.

Can you mount a 55 inch TV on drywall?

Yes, with care. A fixed or tilting bracket should be fixed into the studs behind the board, or with fixings made for hollow walls. Avoid full-motion arms on drywall unless they're fixed into solid framing, as the leverage can pull them loose.

Will a 55 inch TV wall mounting bracket hold a 65 inch TV?

Only if it lists the 65 inch TV's VESA pattern and its weight rating covers the heavier set. Many brackets cover both sizes, but check the box. If you plan to upgrade, buy the bigger-rated bracket now and save drilling twice.

Do I need HOA permission to mount a TV in a Durbanville estate?

Inside your home you normally don't, but many Durbanville estates have rules about outside walls, patios and contractor hours. Check with your HOA or body corporate before mounting a TV on a patio or outside wall, and before booking work on a weekend.

Talk to our Durbanville team

Call or WhatsApp us for a quote. We answer quickly and we always price the job before we arrive.